Effect of the Spherical Silica Surface on the Photoluminescence of the Loaded CdS Nanoparticles

CdS nanoparticles were formed on the surface of silica microspheres by the improved layer‐by‐layer self‐assembled technique. High‐resolution electron microscope (HRTEM) image and energy dispersive x‐ray analysis (EDX) confirmed formation of a quasi‐continuous CdS nanoparticles film on the silica microspheres. The results of UV‐vis and fluorescence spectra display that the spherical silica surface has a great effect on the photoluminescence of the loaded CdS nanoparticles. In contrast to the CdS nanoparticles powder, the composite can exhibit the emission ascribed to the band gap transition when the CdS nanoparticles film is relatively thick. This phenomenon is probably due to an enhancement of the crystallinity of CdS nanoparticles induced by the silica spheres.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.     

CdSe/泡沫镍薄膜电极对结晶紫的光电催化降解

采用恒电位电沉积法,以泡沫镍为基底电极,制备了CdSe/泡沫镍薄膜电极,采用扫描电子显微镜、紫外可见漫反射光谱和能谱分析表征了CdSe薄膜的形貌及其组成。应用该电极研究结晶紫溶液在光电催化降解过程中的COD去除率。结果表明,以白炽灯(100 W,2只)为光源,采用电沉积30 min所得的CdSe/泡沫镍薄膜电极为工作电极,外加偏压为0.4 V(vs.SCE),0.01 mol/L NaCl为电解质,光电催化降解浓度为0.001 g/L的结晶紫溶液120 min,COD去除率达到84.3%。     

Comparative study on structure and properties of titanium/silicon mono‐ and co‐doped amorphous carbon films deposited by mid‐frequency magnetron sputtering

The titanium/silicon mono‐ and co‐doped amorphous carbon films were deposited by mid‐frequency magnetron sputtering Ti target, Si target, and Ti80S20 alloy target, respectively. The effects of doped elements on the composition, surface morphology, microstructure, and mechanical and tribological properties of the films were investigated. The results reveal that the ratio of sp³ and sp² carbon bonds of the films is regulated between 0.28 and 0.62 by a combination of Ti and Si dopant. The addition of small amounts of silicon leads to an increase in sp³ bonds and disorder degree of the sp² carbon. The co‐doped film exhibits significantly superior friction performance than the mono‐doped films. The ultra‐low friction (μ < 0.01) was achieved under a load of 2 N in ambient air with 40% RH. By comparing to the mono‐and co‐doped films, it is thought that the sp³/sp² ratio of the films may play a key role for the superlow friction. Copyright © 2013 John Wiley & Sons, Ltd.     

Toward a Raman/FORS discrimination between Art Nouveau and contemporary stained glasses from CdSxSe1 − x nanoparticles signatures

CdS_xSe_{1 − x} quantum dots received considerable attention in academic studies and as cut‐off filters and indirect‐gap semiconductors. These later compounds have also been used for artistic purposes to produce colored glass since the 1920s thanks to their bright colors. Because non‐invasive conditions are now mandatory when considering objects belonging to the cultural heritage, the use of Raman and fiber optics reflectance spectroscopy has been identified as potential ones to obtain information about the nanostructure of six samples of historical glass produced between the late 1920s and modern days. The average elemental composition of the nanocrystals has been deduced processing both optical and vibrational data, and the result arising has been compared taking into account the several factors affecting the experimental results. The diffusion of zinc inside the nanocrystals has also been questioned by the shift caused on the CdS‐ and CdSe‐like phonon band wavenumber and on the absorption edge wavelength. An investigation of the size distribution and crystallinity of CdS_xSe_{1 − x} nanoparticles has been also performed considering those parameters that are mainly influenced by the disorder of the system, such as the extent of the Urbach tail and the Raman bandwidth. Thanks to the results obtained, discrimination between the more recent glass and the older Art Nouveau ones has been verified, leading to the identification of a useful analytical protocol for conservation purposes. Copyright © 2015 John Wiley & Sons, Ltd.     

Temperature and Composition Dependent Optical Properties of CdSe/CdS Dot/Rod-Based Aerogel Networks

Employing nanocrystals (NCs) as building blocks of porous aerogel network structures allows the conversion of NC materials into macroscopic solid structures while conserving their unique nanoscopic properties. Understanding the interplay of the network formation and its influence on these properties like size-dependent emission is a key to apply techniques for the fabrication of novel nanocrystal aerogels. In this work, CdSe/CdS dot/rod NCs possessing two different CdSe core sizes were synthesized and converted into porous aerogel network structures. Temperature-dependent steady-state and time-resolved photoluminescence measurements were performed to expand the understanding of the optical and electronic properties of these network structures generated from these two different building blocks and correlate their optical with the structural properties. These investigations reveal the influence of network formation and aerogel production on the network-forming nanocrystals. Based on the two investigated NC building blocks and their aerogel networks, mixed network structures with various ratios of the two building blocks were produced and likewise optically characterized. Since the different building blocks show diverse optical response, this technique presents a straightforward way to color-tune the resulting networks simply by choosing the building block ratio in connection with their quantum yield.     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

摩擦点火Ti-V-Cr阻燃钛合金燃烧产物的组织特征

采用摩擦氧浓度实验方法, 结合原位观察、扫描电镜、能谱仪和X-射线衍射分析, 系统研究Ti-V-Cr 阻燃钛合金燃烧产物的微观组织形貌、燃烧反应过程的合金元素分布规律及微观机理. 结果表明: Ti-V-Cr 阻燃钛合金燃烧过程发出闪亮耀眼的白光, 具有典型金属燃烧的火焰特征. 燃烧产物主要有TiO₂, V₂O₅和Cr₂O₃三种氧化物, 该混合氧化物以分散颗粒和致密连续体存在. 分散颗粒为规则的球形; 致密连续燃烧产物的微观组织具有分区特征, 从合金基体至燃烧表面依次为过渡区、热影响区、熔凝区和燃烧区. 其中, 过渡区存在一些微小的颗粒状凸起, 且有一定方向性; 热影响区中形成大量V基固溶体相和少量的Ti基固溶体相, V基固溶体相上存在Ti的含量远高于基体的针状析出物; 熔凝区中, 大量的Ti基固溶体中存在少量的V基固溶体; 燃烧区主要为Ti, V和Cr的氧化物混合物. 热影响区的V基固溶体相降低了Ti元素向熔凝区的迁移速率, 减慢了燃烧区Ti与O的优先反应; 燃烧区形成的TiO₂, V₂O₅和Cr₂O₃混合氧化物和熔凝区O在Ti中大量固溶共同终止了O向合金基体的继续扩散, 从而使Ti-V-Cr阻燃钛合金表现出优异的阻燃功能性.